阿西河

所有教程

公众号
🌙
阿西河前端的公众号

我的收藏

    最近访问  (文章)

      教程列表

      抓包专区
      测试专区

      Locust 命令行参数

      Locust 参数

      打开命令提示符(或 Linux 终端),输入 locust --help

      > locust --help
      Usage: locust [options] [LocustClass [LocustClass2 ... ]]
      
      Options:
        -h, --help            show this help message and exit
        -H HOST, --host=HOST  Host to load test in the following format:
                              http://10.21.32.33
        --web-host=WEB_HOST   Host to bind the web interface to. Defaults to '' (all
                              interfaces)
        -P PORT, --port=PORT, --web-port=PORT
                              Port on which to run web host
        -f LOCUSTFILE, --locustfile=LOCUSTFILE
                              Python module file to import, e.g. '../other.py'.
                              Default: locustfile
        --csv=CSVFILEBASE, --csv-base-name=CSVFILEBASE
                              Store current request stats to files in CSV format.
        --master              Set locust to run in distributed mode with this
                              process as master
        --slave               Set locust to run in distributed mode with this
                              process as slave
        --master-host=MASTER_HOST
                              Host or IP address of locust master for distributed
                              load testing. Only used when running with --slave.
                              Defaults to 127.0.0.1.
        --master-port=MASTER_PORT
                              The port to connect to that is used by the locust
                              master for distributed load testing. Only used when
                              running with --slave. Defaults to 5557. Note that
                              slaves will also connect to the master node on this
                              port + 1.
        --master-bind-host=MASTER_BIND_HOST
                              Interfaces (hostname, ip) that locust master should
                              bind to. Only used when running with --master.
                              Defaults to * (all available interfaces).
        --master-bind-port=MASTER_BIND_PORT
                              Port that locust master should bind to. Only used when
                              running with --master. Defaults to 5557. Note that
                              Locust will also use this port + 1, so by default the
                              master node will bind to 5557 and 5558.
        --expect-slaves=EXPECT_SLAVES
                              How many slaves master should expect to connect before
                              starting the test (only when --no-web used).
        --no-web              Disable the web interface, and instead start running
                              the test immediately. Requires -c and -r to be
                              specified.
        -c NUM_CLIENTS, --clients=NUM_CLIENTS
                              Number of concurrent Locust users. Only used together
                              with --no-web
        -r HATCH_RATE, --hatch-rate=HATCH_RATE
                              The rate per second in which clients are spawned. Only
                              used together with --no-web
        -t RUN_TIME, --run-time=RUN_TIME
                              Stop after the specified amount of time, e.g. (300s,
                              20m, 3h, 1h30m, etc.). Only used together with --no-
                              web
        -L LOGLEVEL, --loglevel=LOGLEVEL
                              Choose between DEBUG/INFO/WARNING/ERROR/CRITICAL.
                              Default is INFO.
        --logfile=LOGFILE     Path to log file. If not set, log will go to
                              stdout/stderr
        --print-stats         Print stats in the console
        --only-summary        Only print the summary stats
        --no-reset-stats      Do not reset statistics once hatching has been
                              completed
        -l, --list            Show list of possible locust classes and exit
        --show-task-ratio     print table of the locust classes' task execution
                              ratio
        --show-task-ratio-json
                              print json data of the locust classes' task execution
                              ratio
        -V, --version         show program's version number and exit
      

      参数说明

      参数说明
      -h, --help查看帮助
      -H HOST, --host=HOST指定被测试的主机,采用以格式:`http://10.21.32.33`
      --web-host=WEB_HOST指定运行 Locust Web 页面的主机,默认为空 ''。
      -P PORT, --port=PORT, --web-port=PORT指定 --web-host 的端口,默认是8089
      -f LOCUSTFILE, --locustfile=LOCUSTFILE指定运行 Locust 性能测试文件,默认为: locustfile.py
      --csv=CSVFILEBASE, --csv-base-name=CSVFILEBASE以CSV格式存储当前请求测试数据。
      --masterLocust 分布式模式使用,当前节点为 master 节点。
      --slaveLocust 分布式模式使用,当前节点为 slave 节点。
      --master-host=MASTER_HOST分布式模式运行,设置 master 节点的主机或 IP 地址,只在与 --slave 节点一起运行时使用,默认为:127.0.0.1.
      --master-port=MASTER_PORT分布式模式运行, 设置 master 节点的端口号,只在与 --slave 节点一起运行时使用,默认为:5557。注意,slave 节点也将连接到这个端口+1 上的 master 节点。
      --master-bind-host=MASTER_BIND_HOSTInterfaces (hostname, ip) that locust master should bind to. Only used when running with --master. Defaults to * (all available interfaces).
      --master-bind-port=MASTER_BIND_PORTPort that locust master should bind to. Only used when running with --master. Defaults to 5557. Note that Locust will also use this port + 1, so by default the master node will bind to 5557 and 5558.
      --expect-slaves=EXPECT_SLAVESHow many slaves master should expect to connect before starting the test (only when --no-web used).
      --no-webno-web 模式运行测试,需要 -c 和 -r 配合使用.
      -c NUM_CLIENTS, --clients=NUM_CLIENTS指定并发用户数,作用于 --no-web 模式。
      -r HATCH_RATE, --hatch-rate=HATCH_RATE指定每秒启动的用户数,作用于 --no-web 模式。
      -t RUN_TIME, --run-time=RUN_TIME设置运行时间, 例如: (300s, 20m, 3h, 1h30m). 作用于 --no-web 模式。
      -L LOGLEVEL, --loglevel=LOGLEVEL选择 log 级别(DEBUG/INFO/WARNING/ERROR/CRITICAL). 默认是 INFO.
      --logfile=LOGFILE日志文件路径。如果没有设置,日志将去 stdout/stderr
      --print-stats在控制台中打印数据
      --only-summary只打印摘要统计
      --no-reset-statsDo not reset statistics once hatching has been completed。
      -l, --list显示测试类, 配置 -f 参数使用
      --show-task-ratio打印 locust 测试类的任务执行比例,配合 -f 参数使用.
      --show-task-ratio-json以 json 格式打印 locust 测试类的任务执行比例,配合 -f 参数使用.
      -V, --version查看当前 Locust 工具的版本.
      目录
      目录